Wireless remote water pump.
Control the rice cooker in the office.
Wireless control lights, fans.
Wireless control power, audio, and other equipment.
Feeding the family pet via the GSM switch.
Other household or industrial control applications.
GSM Remote Controlsoket in Bangladesh.
GSM Remote Controlsoket in Bangladesh.
GSM Remote Controlsoket in Bangladesh.

Specification of remote control gsm socket.
GSM frequency: GSM850/900/1800/ 1900MHZ Quad-Band.
Rated voltage: 110V-220V.
Rated current: 10A.
Rated frequency: 50Hz.
Rated Power: less than 2200W.
Inherent power: less than 0.2 W.
GSM Remote Controlsoket in Bangladesh.
User Instructions:.
A.Basic setup and operation.
1. Install SIM card Installed your SIM card before power on, non-installed SIM card after power on!A short initialization time (20 seconds) after power on, related operations after initialization. GSM switch is disconnected by default.

Cellphone Remote Control Power GSM Switch Socket via Call or SMS for Home Automation
( GSM Remote Control Power Switch).
* On/ off command via SMS/ free call control relay on or off.
* SMS/ Free Call Control Electric Door Get On to Off (0.5 to 9 seconds), then on or off to on (0.5 to 9 seconds), then back off via T and XL command.
* Control other electrical devices from on-off (001 to 255 minutes), then turn on or off again (from 001 to 255 minutes), then go back via SMS L command.
Applications:.

You can control the GSM switch through phone calls or SMS. It can control water heaters, electric motors, electric doors, lights, rice cookers, and other appliances. Whether you're on the road or in the office, low-cost and easy to control remote appliances:.

2. Waiting for SIM card to connect the GSM network (according to local operators and signal level, usually about 1 minute to get into the network), and observe the SIG lights on the panel (the start is 1-second flash), when flash becomes 4 seconds, the proof has entered the GSM network, Then you can set and control the associated operation.

C.Key Control (GSMSW-A1 panel has two buttons, one is SW, one is SET.).
Control switch status When you press the SW button, the switch state will be overturned. If the original is into Shutdown mode, GSM plug into connected.
2. Set master number When you press the SET button, the SIG lights will enter the flash state, about 90 seconds, The numbers plug into the GSM switch will be set to the master number during this time. When a GSM switch during this period received a call comes in, it will hang up after a 1-second call, and stop flashing SIG lights into the normal state, and the new master number will be saved, with power-down memory.
The system will restore the factory settings, STA lights flash slowly three times, 5 groups master numbers will be clear, the relay will enter the off state, the password also changed the factory code (0000 ). Set this function when the forgotten password or special circumstances.

B.SMS Control.

GSM Remote Controlsoket in Bangladesh.

SMS change switch status: Edit message "SN +****( passwords) + CHANGE "to send to the GSM switch, can change the status when control is successful, GSM switch will return the current status. The password is 1234, edit text: SN1234CHANGE, sent to the GSM switch]
SMS check switch status: Edit message "SN +****( passwords) + CHECK "to send to the GSM switch, can change the state when control is successful, GSM switch will return the current state. The password is 1234, edit text: SN1234CHECK, sent to the GSM switch]
SMS turn on the switch: Edit message "SN +****( passwords) + ON "to send to the GSM switch, can change the state when control is successful, GSM switch will return the current state. The password is 1234, edit text: SN1234ON, sent to the GSM switch]
4. SMS turn off switch: Edit message "SN +****( passwords) + OFF "to send to the GSM switch, can change the state when control is successful, GSM switch will return the current state. The password is 1234, edit text: SN1234OFF, sent to the GSM switch.

Set Password Must set up the user password first, GSM switch initial password is: 0000. Customers want to set their passwords to: "1234", then he should edit the message content: "SN0000NEW1234" issued to GSM switch, if you set successfully, you will receive the message: "NEW SN SETOK NEW SN IS 1234 (New password).

Set master number GSMSW-A1 owners can set up 5 groups of master numbers, The setting format is: "SN +****( password) + SET + master numbers", send to the number of GSM switch, you can set the master numbers, such as the user's password is 1234, trying to set 13788889999 to master number, and then edit the message content: "SN1234SET13788889999" issued to GSM switch, if successfully, you will receive a message: "13788889999SETOK". Only the master number can control the outlet by dialing, when the master number dial number of GSM switch, the switch status will change, and then hang up automatically after one second, does not produce any cost.
Ringing to control Users control the GSM switch by dial the number of GSM switches when getting through the socket state change and hang up after 1 second. If the switch is connected, it will change to a disconnected state after a call.

Notes:.

1. SIM card requirements: global GSM standard SIM card can be used, currently does not support 3G or CDMA card, please activate the new SIM before inserting the device.
2. Do do not place the GSM switch in the tin trunk or metal-enclosed environment, this will cause the signal unable to access the GSM network or worse, affect the actual use.
3. Incoming Caller ID display must be turned on, make sure that SIM card has sufficient balance in order to send and call text messages.
When the signal is weak in some environments, it will make SMS controlled no that ideal, and this is normal. In such circumstances, if you want to set the master number, consider using the SET button to set the master number will be more efficient.
5. To save time, once the dial socket after the success of GSM call will automatically hang up the number of the owner, the user may hear "Your call can not be answered, please hang up, beeps, etc" in a normal tone.
6. SMS or phone in the control, not to operate the buttons at the same time, this will cause system instability.
Using the product should pay attention to moisture, limited to indoor use. Power does not work more than 2200W, inductive load power by half.
This product can only control the power supply switched on or off, does not have other functions. For the state to maintain electrical power, such as most of the TV, stereo can immediately work.
9. This product only works with 110V ~ 220V AC voltage range, can not be used in cars, or another voltage environment.

Ringing to control Users control the GSM switch by dial the number of GSM switches when getting through the socket state change and hang up after 1 second. SMS change switch status: Edit message "SN +****( passwords) + CHANGE "to send to the GSM switch, can change the status when control is successful, GSM switch will return the current status. SMS check switch status: Edit message "SN +****( passwords) + CHECK "to send to the GSM switch, can change the state when control is successful, GSM switch will return the current state. SMS turn on the switch: Edit message "SN +****( passwords) + ON "to send to the GSM switch, can change the state when control is successful, GSM switch will return the current state. SMS turn off switch: Edit message "SN +****( passwords) + OFF "to send to the GSM switch, can change the state when control is successful, GSM switch will return the current state.

 
Specification of remote control gsm socket

GSM frequency: GSM850/900/1800/1900MHZ Quad-Band

Rated voltage: 110V-220V
Rated current: 10A
Rated frequency: 50Hz
Rated Power: less than 2200W
Inherent power: less than 0.2W