1. Oxygen flow setting range 1-10L / min
2. 0.2 ~ 0.3 MPa for constant pressure regulator
3. Operating pressure: high-pressure oxygen inhaler part inlet 12 MPa-15 MPa pressure, blood pressure should be lowered then 0.2 MPa -0.3 MPa pressure range
4. Then, to hold the high-pressure part inhaler gear regularly for hydraulic testing for 22 minutes, there should be no permanent deformation of the high-pressure part
5. Drain valve discharge pressure 0.05 MPa in 0.35mp, increase inhalation output pressure own pressure, exhaust valve it is possible to automate
.. Tighten the nut thread-shaped inhaler and oxygen cylinder attached to the G5 / 8 "
Maximum External Cone Joint Pipeline 7 Oxygen, Joint Angular Horse Maximum External Diameter Φ9mm ± 0.5mm
8. Most inhaler tide bottles are well colorless and transparent, and mark the maximum and minimum liquid