Water Level Sensor Transmitter Level Meter Digital Ultrasonic Water Tank Liquid Depth Level Tester with Temperature Display
Description:

Displays indoor temperature ( ° or °) and tank temperature ( ° or ° )at the same time.

Installed at the top of your water tank, the transmitter unit measures the water level using an ultrasonic sensor and temperature using a thermosensor. View your room's temperature, tank temperature, and water level (represented by a 10 element bar graph).

This meter monitors tank liquid depth level and displays on a 10-element LCD bar graph.

It can keep min/max records of tank liquid level.

Supports tank liquid level high/low alarm and tank liquid empty alert.

The receiver can be put standing on a desk or hanging on the wall
Indoor Temperature Range: 0 ~ 60 °
Water Level Measure Rang: 0 ~ 15m.

Transmission Frequency: 433MHZ.

Transmitter Size: 97 * 68 * 152mm.

Suitable Liquid Type: All non-corrosive liquid.

. Outdoor Temperature Range: -40 ~ 60 °.

Transmission Interval: 30s when leveling changes or 3 minutes when the level does not change.

Resolution: 0.01 m.

Package Includes:.

LCD Size: 66 * 45mm( 3.3 inch).

Transmitter Battery: 6X AAA 1.5 V LR6 Alkaline or lithium batteries (Not included).

Receiver Size: 108 * 94 * 27mm.

Accurate: +/ -0.03 M.

Minimum 12 months for the transmitter.

Receiver Battery: 2X AA 1.5 V LR3 Alkaline batteries (Not included).

Temperature Accuracy: ± 1oC.

Battery Life: Minimum 12 months for the receiver.

Transmission Range: 100 meters( 300 feet) in open area.

1 x Water Level Sensor Transmitter.

1 x Indoor Receiver.

2 x Screws.

Keep an eye on your outdoor water tank from the comfort of your own living room, up to 100m away. Installed at the top of your water tank, the transmitter unit measures the water level using an ultrasonic sensor and temperature using a thermosensor. You can hang the receiver unit on a wall or pull out the stand and place it on your kitchen table, desk, or benchtop. View your room's temperature, tank temperature, and water level (represented by a 10-element bar graph). You can store min/max records and set alarms for specific water levels (high/low) or when empty.

( Batteries are NOT included).